- Bimetallic Cylinder
- Bimetallic Screw
- Bimetallic high-output extruder
- Segment element for twin extruder
- Recycle/Reclaim machine system
- EPE foam sheet production line
China Extruder
> Home > Products > Bimetallic high-output extruder
Bimetallic high-output extruder
- Due to adopt bimetallic barrel and screw as an extruder heart, the matching wear ratio between two different alloys has a maximum improvement, the screw speed could be raise up and that creates a condition to get more extruder output.
- Our special design for screw and barrel of extruder which according to different plastic performance and different plastication, the extruder output could be maximum and the consumed power could be minimum.
- All fitted pivotal parts for extruders, such as motor, transducer, gearbox, temperature instruments, or advanced groupware made in China, or import according to requirement, that gets high dependability and stability for extruders.
| Type/ Parameters | SJB45- | SJB65- | SJB90- | SJB120- | SJB150- | SJW150- | |
| 25 28 | 25 28 30 | 25 28 30 | 25 28 30 | 25 28 | 6 | ||
| Screw Diameter | 45mm | 65mm | 90mm | 120mm | 150mm | 150mm | |
| Effective Length | 25D 28D | 25D 28D 30D | 25D 28D 30D | 25D 28D 30D | 25D 28D | 6D | |
| Motor Power | 7.5kw7.5kw | 30kw40kw40kw | 75kw90kw90kw | 80kw110kw110kw | 140kw200kw | 50kw | |
| Motor Form | D.C. A.C. |
D.C. A.C. |
D.C. A.C. |
D.C. A.C. |
D.C. A.C. |
D.C. A.C. |
|
| Screw-Speed r/min | 120 140 | 120 110 120 | 110 110 100 | 84 90 100 | 70 75 | 50 | |
| Heating Zones | 3/3 4/4 | 4/4 4/4 5/5 | 5/5 5/5 6/6 | 5/5 6/6 7/7 | 8/8 9/9 | 1/1 | |
| Cooling Media | AIR | AIR | AIR | AIR | AIR | AIR | |
| Heating Capacity | 8kw9kw | 16kw16kw19kw | 28kw28kw32kw | 52kw52kw60kw | 70kw72kw | 9kw | |
| Cylinder Material | Bimetal | Bimetal | Bimetal | Bimetal | Bimetal | Bimetal | |
| Intake Execution | Smooth/Grooved | Smooth/Grooved | Smooth/Grooved | Smooth/Grooved | Smooth/Grooved | Grooved | |
| Screw Material | Nitrid AbleBimetal | Nitrid AbleBimetal | Nitrid AbleBimetal | Nitrid AbleBimetal | Nitrid AbleBimetal | Nitrid AbleBimetal | |
| Center Altitude | 1000mm | 1000mm | 1000mm | 1000mm | 1100mm | 1100mm | |
| Kg/r Max. Output-Rate (Ex.) |
HDPE | 70 | 150 | 350 | 450 | 650 | - |
| SPVC | 48 | 120 | 300 | 300 | 500 | 1000 | |
| PS | - | 100 | 360 | 500 | - | - | |